Awaiting product image

ONV-POE31024PL Gigabit Uplink PoE Switch

0/100Mbps access , gigabit uplink

◇ All series supports “10/100M RJ45 port and 10/100/1000M RJ45 port” combination, which enables users to flexibly build networking to meet the needs of various scenarios.

◇ Support non-blocking wire speed forwarding

◇ Support full duplex based on IEEE802.3x and half duplex based on Backpressure

 

Smart PoE power supply function

◇ 24*10/100Base-TX RJ45 ports support PoE power supply, which meets the requirements of PoE power supply in various scenarios in the security field.

◇ Comply with IEEE 802.3af /at PoE power supply standard, automatically identify PoE devices for power supply without damaging non-PoE devices. The maximum PoE output power is 250W, and the maximum PoE output power of a single port is 30W.

◇ The PoE port supports the priority mechanism. When the remaining power is insufficient, the power supply of the high-priority port is preferentially guaranteed to prevent the device from being overloaded.

 

Innovative function

◇ Long distance switch: When opening, the speed of 17-24 port is reduced to 10M. With the existing twisted pair cable, the transmission limit of the twisted pair can be broken. The transmission distance can reach 250 meters; on the other hand, It can solve the problem of poor transmission caused by line aging.

Category:

TECHNICAL SPECIFICATION

 

Model

ONV-POE31016PL

ONV-POE31024PL
Interface 16*10/100Base-TX PoE ports (Data/Power)

2*10/100/1000Base-T Uplink RJ45 ports (Data)

 24*10/100Base-TX PoE ports (Data/Power)

2*10/100/1000Base-T Uplink RJ45 ports (Data)
POE Port Port 1-16 support PoE @ IEEE802.3af/at Port 1-24 support PoE @ IEEE802.3af/at
Functional Switch After opening, port 9-16 support 10M/250 meters long distance transmission. After opening, port 17-24 support 10M/250 meters long distance transmission.
Note: When the switch status changes, the PoE switch must be restarted for the switch function to take effect.
Network Protocol IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;

IEEE802.3u 100Base-TX;

IEEE802.3ab 1000Base-T;

IEEE802.3x
PoE Standard IEEE802.3af/at
Ethernet Port Feature 10/100Base-T(X) ,10/100/1000Base-T automatic detection, full/half Duplex MDI/MDI-X adaptive
Fiber Port Feature Store and Forward(Full Wire Speed)
Forwarding Mode 14.8Gbps(non-blocking)
Forwarding Rate@64byte 5.36Mpps 6.55Mpps
MAC 16K
Buffer Memory 4M
Jumbo frames 10K
Twisted Pair Transmission 10BASE-T:Cat5 UTP(≤250 meter)

100BASE-TX:Cat5 or later UTP(≤100 meter)

100BASE-T:Cat5e or later UTP(≤100 meter)
Power Supply Pin Default 1/2(+), 3/6(-); Optional 4/5(+), 7/8(-)
MAX / AVERAGE Power Per Port 30W/15.4W
Total PWR / Input Voltage 250W (100-240V)
Power Consumption Standby:<15W;Full load:<240W Standby:<20W;Full load:<250W
LED Indicator Power indicator: PWR (green); Network indicator : 1-16(24)/G1-2 (green); POE indicator:PoE (green)
Power Supply Built-in switching power supply, AC 100 ~ 240V 50-60Hz 4.1A, support short circuit, over current, overload protection
Operation TEMP / Humidity -20~+55°C:5%~90% RH non condensing
Storage TEMP / Humidity -40~+75°C;5%~95% RH non condensing
Dimension 270*171*44.5mm 330*204*44mm
Net /Gross Weight <1.7kg / <2.2kg <2.3kg / <3kg
Installation desktop type ,wall mounted,19 inch 1U cabinet installation
Port lightning protection / protection level Port lightning protection : 4KV 8/20us;Protection level: IP30

Reviews

There are no reviews yet.

Be the first to review “ONV-POE31024PL Gigabit Uplink PoE Switch”

Your email address will not be published. Required fields are marked *

Related products